Studio Koko

The Complete Story of the Studio Koko

The studio KOKO is a good example of acoustic design.

According to the size of the premises, everything has been set up to obtain the best result.

1) Analysis of the room following the method of the finished elements

2) 3 D technical drawing with on site measurements at different key moments

3) Sound pressure simulation with our computer software


Pressure simulation without treatment	Pressure simulation with acoustic treatment

The Targets:

Reduce the own modes, standing waves to nothing from 35 Hz up to 400 Hz.

Thanks to the symmetrical, but non parallel walls, the listening area is large and wide.
Producer and musicians can sit at the back, on the side or at mixing position with no difference.

The measurement reflects the predictions.

Technical data sheet:

Width: 9 Meters, Depth 7.5 Meters, Height: 3.5 Meters.
Frequency range: 45 Hz – 35 KHz +/- 2db / 35 Hz – 5 db/ 25 Hz -10 Db @ listening position
Max pressure @ lst pos RMS: 122 Db / Peak 130 Db.

Return to Studio's page >